Hellow guys, Welcome to my website, and you are watching How to install an Adjustable Ultra Toilet Flapper by Korky. and this vIdeo is uploaded by Korky Toilet Repair at 2016-05-13T14:17:52-07:00. We are pramote this video only for entertainment and educational perpose only. So, I hop you like our website.
| Name | How to install an Adjustable Ultra Toilet Flapper by Korky |
| Video Uploader | Video From Korky Toilet Repair |
| Upload Date | This Video Uploaded At 13-05-2016 21:17:52 |
| Video Discription | Adjustable Ultra Flapper Install by Korky | http://www.korky.com/flappers/adjustable-ultra-water-saver-flapper Hello and Welcome to Korky Toilet Repair. Today we are going to install your Korky Ultra saver flapper. The first step is to shut off the water supply to your toilet. Next flush your toilet. Several popular toilet models are printed on back of the packaging. If your toilet model number appears on the card, adjust the band and dial to the settings listed on the packaging. The toilet brand can usually be found between the toilet seat and the tank. Toilet model numbers are often stamped on the inside back wall of the tank. If your toilet model is listed and you have adjusted the band and dial to the correct positions you will not need to adjust the flapper further. If your toilet model is not listed, mark the water level in the tank with a pencil and drain the excess water. Remove the old flapper. Install the Korky Ultra Saver Flapper. Attach the flapper ears to the tabs of the flush valve. Attach the flapper chain to the flush lever with minimal slack. Turn the water supply on and wait for the tank to fill completely. Turn the water supply off and flush. If the water drops within a half inch of the pencil mark your installation is finished. If not, rotate the red band to the open position and reinstall the flapper. Turn the water supply on and let the tank refill completely. Turn the water supply off and flush. If your water level is still not within a half inch of the pencil mark, adjust the dial so the next lowest number aligns with the arrow. Then reinstall your flapper. Turn the water supply on and let the tank refill completely. Turn your water supply off and flush. Repeat this process until the water level drops within a half inch of the pencil mark. Your installation is now complete. Congratulations you have just installed your Korky Ultra Saver Flapper. Thank you for choosing Korky. If you have any questions or need further assistance with your installation, please visit our website or call us at 1 800 528 3553. |
| Category | Howto & Style |
| Tags | Toilet Flapper | universal | Korky | made in USA | Premium flapper | longest lasting | easy to install | how to install | tank ball | Ultra water saver | adjustable flapper | 100 | 100BP | 100cm |
