35 Sine Tones *For Audio Engineers*
Hellow guys, Welcome to my website, and you are watching 35 Sine Tones *For Audio Engineers*. and this vIdeo is uploaded by Outlier Audio at 2019-07-13T17:25:15-07:00. We are pramote this video only for entertainment and educational perpose only. So, I hop you like our website.
Info About This Video
Name |
35 Sine Tones *For Audio Engineers* |
Video Uploader |
Video From Outlier Audio |
Upload Date |
This Video Uploaded At 14-07-2019 00:25:15 |
Video Discription |
1-minute pure sine tones at 35 frequencies.
*KEEP VOLUME LOW. Audio signals (whether test signals or music) can cause hearing loss or speaker/amplifier damage even if you cannot hear them! NEVER troubleshoot while wearing headphones.
*DO NOT USE if you are not professionally trained in audio/acoustics. Instead consider the Fast Audio Test https://youtu.be/2ZrWHtvSog4 or Extended Audio Test https://youtu.be/lfgWv3ypEIY.*
*DISCLAIMER: You are fully responsible for the use and outcome of this video. Outlier Audio channel takes no responsibility nor owns any liability whatsoever for any outcome (whether damage, injury, or otherwise) from the use of this video or any videos on the channel. In no event shall this channel be liable for any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this video. If that is not acceptable, you may not not use this videos or any videos on this channel.
- DO NOT TURN UP THE VOLUME if you can't hear the sound (unless you know what you are doing). Frequencies at the low range will be inaudible even if the speaker cone is moving. Just as with other bass-heavy music/tests, you could push your speakers past their mechanical limit if you're not careful.
- DO NOT USE AS A HEARING TEST. Go to an audiologist.
- DO NOT USE FOR TUNING YOUR SPEAKER EQUALIZER. At the least you'll need a calibrated microphone and acoustic tuning software/hardware.
This is a stepped sine wave test covering the full audio spectrum (but possibly limited by YouTube compression and your playback setting). 1-minute pure sine tones at 35 frequencies.
0:01 10 Hz / Infrasonic
1:01 12.5 Hz
2:01 16 Hz
3:01 20 Hz / Lower Hearing Threshold
4:01 25 Hz
5:01 31.5 Hz
6:01 40 Hz
7:01 50 Hz
8:01 63 Hz
9:01 80 Hz
10:01 100 Hz
11:01 125 Hz
12:01 160 Hz
13:01 200 Hz
14:01 250 Hz
15:01 315 Hz
16:01 400 Hz
17:01 500 Hz
18:01 630 Hz
19:01 800 Hz
20:01 1000 Hz / Standard Calibration Tone
21:01 1250 Hz
22:01 1600 Hz
23:01 2000 Hz
24:01 2500 Hz
25:01 3150 Hz
26:01 4000 Hz
27:01 5000 Hz
28:01 6300 Hz
29:01 8000 Hz
30:01 10000 Hz
31:01 12500 Hz
32:01 16000 Hz
33:01 18000 Hz
34:01 20000 Hz / Upper Hearing Threshold
All signals created at Outlier Studios using floating point arithmetic and dithered at 16-bit before Youtube upload. Wavelength in units of time and distance (assumes 343 m/s speed of sound in air). Amplitude -14 dBFS (AES).
Post your questions/comments below. For consulting inquiries in audio/acoustics, contact me at: https://bit.ly/outlieraudio
// Made with Magix Movie Edit Pro: http://bit.ly/30qEGHE
// Please subscribe to support! |
Category |
Science & Technology |
Tags |
audio | sine wave | frequency | test | signal |
More Videos